Solutions / Inspection

SOLUTION · INSPECTION

Vision

Inspect every part, not a sample.

Use cameras and AI to inspect every part, verify assembly, and read codes at line speed, with each result tied to the part, the order, and the process conditions behind it.

  • Defect detection
  • Assembly verification
  • Code reading
  • Image record
Vision — IDX-AMOS in a modern manufacturing plant
MANUAL AND SAMPLE INSPECTION

Checks some parts, when there is time.

WITH IDX-AMOS

Checks every part, at line speed.

01 / THE DIFFERENCE

Where it differs.

Five places where the usual approach stops and IDX-AMOS keeps going.

Manual and sample inspection
With IDX-AMOS
Coverage
Manual and sample inspectionA sample from each batch.
With IDX-AMOSEvery part.
Consistency
Manual and sample inspectionVaries with the inspector, the shift, and fatigue.
With IDX-AMOSThe same standard on every part, every shift.
Speed
Manual and sample inspectionSlows the line, or happens after it.
With IDX-AMOSIn line, at production speed.
Record
Manual and sample inspectionPass or fail on a sheet.
With IDX-AMOSImage and result stored against the part.
Feedback
Manual and sample inspectionDefects found at final inspection.
With IDX-AMOSLinked to the process conditions that caused them.
02 / ON THE FLOOR

Same event. Two outcomes.

THE EVENT

A surface defect begins to appear on parts from one station.

Illustrative scenario

Today

  1. SignalThe sample check passes. The defective parts fall between samples.
  2. DiagnosisFinal inspection finds the defects hours later.
  3. DecisionThe batch is sorted by hand.
  4. ResultScrap, rework, and no clear starting point.

With IDX-AMOS

  1. ObserveThe first defective part is caught on camera.
  2. UnderstandIDX-AMOS links the defect to the station, the tool, and when it started.
  3. PrescribeHold the affected parts and check the tool before continuing.
  4. AssistThe operator confirms; images and results stay with each part.
03 / WHAT YOU GET

Four things
behind the difference.

Each shares the same IDX-AMOS operating context, so nothing works from a partial picture.

01

Defect detection

Surface and visual defects found on every part.

02

Assembly verification

Presence, position, and orientation checked before the next step.

03

Code and mark reading

Barcodes, QR codes, and laser marks read for traceability.

04

Image record

Images and results kept against each part.

Vision on the factory floor
THE OUTCOME

Move from sampling quality to seeing every part.

04 / BEFORE YOU DECIDE

Questions we hear
first.

Bring yours to a walkthrough ↗
Do we have to replace our current systems?

No, though you can. IDX-AMOS can run as your MES, ERP, and QMS in its own right, or work alongside the systems you already have. The right scope for your plant is agreed during the walkthrough.

Will it act without our approval?

Only where you allow it. It acts within the permissions, approvals, interlocks, and evidence requirements you define for each workflow. Human authority stays explicit wherever policy, safety, quality, or risk requires it.

Can we start small?

Yes. Start with one line, one cell, or one workflow. We map the signals, decisions, and controls around it, and agree the measurable outcome before anything is scaled.