Solutions / Process

SOLUTION · PROCESS

Real-Time Weld Monitoring

See a bad weld while it is being made.

Monitor welding parameters, equipment conditions, recipes, and quality signatures in real time to detect deviation, preserve traceability, and prevent repeat defects.

Real-Time Weld Monitoring — IDX-AMOS in a modern manufacturing plant
SAMPLE INSPECTION

Finds the bad weld after it is made.

WITH IDX-AMOS

Flags it during the weld.

01 / THE DIFFERENCE

Where it differs.

Five places where the usual approach stops and IDX-AMOS keeps going.

Sample inspection
With IDX-AMOS
Checking
Sample inspectionSample tests and visual inspection.
With IDX-AMOSEvery weld monitored.
Timing
Sample inspectionAfter the part is finished.
With IDX-AMOSDuring the weld.
Parameters
Sample inspectionSet on the machine and trusted.
With IDX-AMOSParameters, equipment condition, and quality signature compared with the recipe in real time.
Records
Sample inspectionLogbooks.
With IDX-AMOSEach weld traceable to its parameters and recipe.
Repeat defects
Sample inspectionFound at the next audit.
With IDX-AMOSThe deviation pattern is caught before it repeats.
02 / ON THE FLOOR

Same event. Two outcomes.

THE EVENT

Weld parameters start drifting on one station as a consumable wears.

Illustrative scenario

Today

  1. SignalThe machine keeps welding. The settings look unchanged.
  2. DiagnosisA destructive test fails hours later.
  3. DecisionEverything since the last good test is quarantined.
  4. ResultRework, scrap, and an unknown number of suspect parts.

With IDX-AMOS

  1. ObserveThe weld signature moves away from the recipe.
  2. UnderstandIDX-AMOS links the drift to the station, the consumable, and the parts affected.
  3. PrescribeReplace the consumable and re-verify before the next part.
  4. AssistThe operator confirms; affected welds are marked and traceable.
03 / WHAT YOU GET

Four things
behind the difference.

Each shares the same IDX-AMOS operating context, so nothing works from a partial picture.

01

Parameter monitoring

Welding parameters watched on every weld.

02

Equipment condition

The state of the welding equipment itself tracked.

03

Recipe control

Each weld checked against the approved recipe.

04

Weld traceability

The record of every weld kept with the part.

Real-Time Weld Monitoring on the factory floor
THE OUTCOME

Move from finding weld defects by sampling to preventing them weld by weld.

04 / BEFORE YOU DECIDE

Questions we hear
first.

Bring yours to a walkthrough ↗
Do we have to replace our current systems?

No, though you can. IDX-AMOS can run as your MES, ERP, and QMS in its own right, or work alongside the systems you already have. The right scope for your plant is agreed during the walkthrough.

Will it act without our approval?

Only where you allow it. It acts within the permissions, approvals, interlocks, and evidence requirements you define for each workflow. Human authority stays explicit wherever policy, safety, quality, or risk requires it.

Can we start small?

Yes. Start with one line, one cell, or one workflow. We map the signals, decisions, and controls around it, and agree the measurable outcome before anything is scaled.