Industries / Oil & Gas

IDX-AMOS FOR OIL & GAS

Built for assets that cannot stop and decisions that cannot be wrong.

Unify condition, maintenance, inspection, energy, and operational risk to support governed interventions across critical assets.

Built for assets that cannot stop and decisions that cannot be wrong. manufacturing
01 / SOUND FAMILIAR?

If you run an oil and gas plant,
you have lived these.

A compressor trips at 2 a.m., and the cost is counted by the hour.

The inspection is due, the unit is running, and the next shutdown window is months away.

Hundreds of alarms a shift. The one that mattered looked like all the others.

The plant network now reaches the control system, and nobody is sure what else does.

02 / YOUR NUMBERS

What you are measured on,
and what we do about it.

No new dashboards to watch. Each line below is a decision IDX-AMOS helps your team make earlier.

YOU ARE MEASURED ONAsset availability
WHAT IDX-AMOS DOES ABOUT IT

Degradation seen early, with the best window to intervene.

YOU ARE MEASURED ONProcess safety
WHAT IDX-AMOS DOES ABOUT IT

Recommendations stay inside permits, interlocks, and approvals.

YOU ARE MEASURED ONMaintenance cost and turnaround scope
WHAT IDX-AMOS DOES ABOUT IT

Work prioritized by consequence, not by calendar.

YOU ARE MEASURED ONEnergy and losses
WHAT IDX-AMOS DOES ABOUT IT

Energy use and losses tied to operating conditions.

03 / A DAY IN YOUR PLANT

Four moments you will recognize.

Illustrative day

  1. Vibration rises on a critical pump.

    IDX-AMOSThe trend is read with temperature and load, and the time to act is estimated.

  2. Morning meeting: a long list of open work requests.

    IDX-AMOSRanked by safety, production, and cost exposure.

  3. A contractor connects a laptop to a skid controller.

    IDX-AMOSThe device is seen, its access limited, and the session recorded.

  4. Handover to the night shift.

    IDX-AMOSOpen risks, pending approvals, and what changed are in one place.

04 / WHERE TO START

Where oil and gas plants
usually begin.

Start with one workflow. These are the closest fit for the problems above.

START WITH ONE WORKFLOW

Bring one problem from your own plant. We will walk through it with you.